MAX3082ECSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 727mW |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3082 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 375μA |
| Data Rate | 115Kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 100mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 2600 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 2 V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3082ECSA+T Overview
Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.Tape & Reel (TR) package is used to mount this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.This wide receiver can be placed on any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 4.75V~5.25V.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.With a supply voltage range of 5V, this line driver ic operates efficiently.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.This transceiver is packaged with 8 market standard pinoutsThis part number MAX3082 can be used to search for more variants based on the product type, temperature, package, etc.The driver IC has improved power dissipation control.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.It is important to note that this ic receiver had a maximum resolution of 1 bits.In most cases, the receiver will be specified with a 1-bit resolution.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.This IC implements 1 transceivers overall.
MAX3082ECSA+T Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
MAX3082ECSA+T Applications
There are a lot of Maxim Integrated MAX3082ECSA+T Drivers/Receivers/Transceivers applications.
- Servers
- Pocket PC
- Single to Multimode Fiber Conversion
- Automation systems
- Remote controls
- Fiber-to-the-desktop
- Wired telephone
- Indoor ad hoc meeting
- WDM transmission
- Ship
