MAX3082EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3082 |
| Pin Count | 8 |
| Output Voltage | 13V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 1mA |
| Quiescent Current | 375μA |
| Data Rate | 115Kbps |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 100mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 2600 ns |
| Output Low Current-Max | 0.004A |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3082EPA+ Overview
LED drivers benefit from this IC's enhanced 8-DIP (0.300, 7.62mm) package.In this package, the receiver is mounted in the Tube format.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.This differential driver uses 4.75V~5.25V for power supply.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 5V.Wide receiver has 8 terminations built in for driving or receiving signals from data.In this package, you will find 8 market-standard pinouts for this transceiver.Since the part number MAX3082 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control is provided by this 8-pin driver IC.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.There is a 5V input voltage supply that can be used to operate this transceiver module.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.The device is capable of delivering voltage at the 13V axis.
MAX3082EPA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX3082EPA+ Applications
There are a lot of Maxim Integrated MAX3082EPA+ Drivers/Receivers/Transceivers applications.
- VoIP phones
- Bar, KTV wireless entertainment
- Wireless access points
- Long-distance fiber optic network applications
- 1x/2x Fiber Channel
- Wireless communication
- Wireless security systems
- transmission relay
- High-speed computer links
- Military satellite communications
