MAX3083ECSD+
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3083 |
| Pin Count | 14 |
| Output Voltage | 13V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 1mA |
| Data Rate | 500kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 100mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Full Duplex |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 2 V |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 667mW |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
MAX3083ECSD+ Overview
Due to the enhanced 14-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The Tube package houses this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.You can place this wide receiver to any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 4.75V~5.25V.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.There are 14 terminations in this wide receiver so that signals can be driven from the data and received.ICs that are packaged with market standard pinouts are available on the market.Since the base part number MAX3083 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation driver IC with 14 pins.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.It was possible to achieve a 1-bit resolution through this ic receiver.This receiver is typically specified with a resolution of 1 bits. There is a 5V input voltage supply that can be used to operate this transceiver module.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.There are 1 transceivers in total implemented by this IC.The device is capable of delivering voltage at 13V.
MAX3083ECSD+ Features
Tube package
14 pin count
14 pins
5V power supply
MAX3083ECSD+ Applications
There are a lot of Maxim Integrated MAX3083ECSD+ Drivers/Receivers/Transceivers applications.
- AV receiver
- Sensor reporting
- Carrier phase observations
- Desktop PC
- Transmission stations
- VoIP phones
- Wireless showroom
- Fiber optic cable connection network
- Changeing the frequency from IF to RF
- Cable network front end
