MAX3085EEPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3085 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 1mA |
| Data Rate | 500kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 100mV |
| Interface Standard | EIA-422; EIA-485 |
| Receive Delay-Max | 200 ns |
| Transmit Delay-Max | 1000 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 2 V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3085EEPA+ Overview
With the enhanced 8-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.Tube package is used for this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.On any Through Hole-type PCB or development board, you can install this wide receiver.A power supply of 4.75V~5.25V is used by this differential driver.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.With a supply voltage range of 5V, this line driver ic operates efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.There are 8 pinouts available on this transceiver which are market standard.MAX3085 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.There is a capability of 1-bit resolution with this ic receiver.In the case of this receiver, a resolution of 1 bits is typically specified.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.The VCC pin of the ic receiver should receive enough but not more than 1mA of input current.
MAX3085EEPA+ Features
Tube package
8 pin count
5V power supply
MAX3085EEPA+ Applications
There are a lot of Maxim Integrated MAX3085EEPA+ Drivers/Receivers/Transceivers applications.
- IPTV front end
- Long-distance fiber optic network applications
- Structural bonding
- Tuner
- Wireless transmission
- Optical sub-assembly (OSA)
- Satellite ground stations
- Routers
- Wireless modems
- Car alarm systems
