banner_page

MAX308MJE

2.54mm 16 Analog Multiplier 16 Pin 15V CDIP


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX308MJE
  • Package: CDIP
  • Datasheet: -
  • Stock: 870
  • Description: 2.54mm 16 Analog Multiplier 16 Pin 15V CDIP (Kg)

Details

Tags

Parameters
Package / Case CDIP
Surface Mount NO
Number of Pins 16
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 16
ECCN Code EAR99
Resistance 175Ohm
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 125°C
Min Operating Temperature -55°C
Subcategory Multiplexer or Switches
Max Power Dissipation 800mW
Technology CMOS
Terminal Position DUAL
Terminal Form THROUGH-HOLE
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 15V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 16
Operating Supply Voltage 28V
Temperature Grade MILITARY
Number of Channels 1
Max Supply Voltage 30V
Min Supply Voltage 5V
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Operating Supply Current 500μA
Propagation Delay 175 ns
Turn On Delay Time 600 ns
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 300 ns
Max Dual Supply Voltage 20V
Min Dual Supply Voltage 5V
Off-state Isolation-Nom 75 dB
On-state Resistance Match-Nom 1.5Ohm
Switching BREAK-BEFORE-MAKE
Signal Current-Max 0.03A
Height Seated (Max) 5.08mm
Width 7.62mm
Radiation Hardening No
RoHS Status RoHS Compliant

MAX308MJE Overview


The packaging of this product consists of Tube.In order to maximize cost efficiency, it is embedded in the CDIP package.The device operates at a voltage of 15V.In this case, the supply voltage is nominally negative and referred to as -15V.A 16 termination is used to prevent signals from reflecting off the end of the transmission line.This is a type of 16-pin electronic component with a high reputation for quality and performance.In the subcategory of Multiplexer or Switches, it can be found as an electronic device.It is recommended that the device operate at a temperature of 125°C.Electronic devices should be operated at a minimum temperature of -55°C.Depending on the component with the lowest tolerance for high temperatures, 240 will determine the reflow temperature limit.The operating voltage of 500μA is ideal for this device.A voltage higher than 5V should be used for the dual supply.It is recommended that the dual supply voltage be lower than 20V.SINGLE-ENDED MULTIPLEXER works as its analog IC type.This device can operate on a voltage of 28V.At 30V, the maximum supply voltage is limited.During normal operation, the minimum supply voltage is kept at 5V.It is configured with 1 channels.There are 16 pins on the device.

MAX308MJE Features


Supplied in the CDIP package
Operating supply current of 500μA
Operating supply voltage of 28V

MAX308MJE Applications


There are a lot of Maxim Integrated MAX308MJE Analog Multipliers & Dividers applications.

  • Strain gauges
  • Portable media players
  • Active probe
  • Multimedia playback equipment
  • Test and measurement instruments
  • Logarithmic and exponential operation circuits
  • Information processing
  • Large motor controllers
  • Proportional operation circuits
  • Addition and subtraction operation circuits

Write a review

Note: HTML is not translated!
    Bad           Good