MAX309ESE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX309 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 500μA |
| Throw Configuration | 4PST |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 750pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 26pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX309ESE+T Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Operational temperature extended around -40°C~85°C TA. There are 16 terminations totally. As a result of its 4 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. This electrical component is included in the 16 series of products. Based on SP4T switching circuits, these analog multiplexers work. 2 circuits are used in this analogue multiplexer. Use MAX309 to search for variants of the digital switches. There is 100Ohm internal resistance in this digital multiplexer. To find out what the 16 pins do, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 30V to the switch device in normal circumstances. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 5V. The analogue multiplexer could operate on 500μA current. Despite this switch device's dual supply capability, its voltage should not exceed 20V. When using dual power supplies, you should attach at least 5V. 28V operating voltages can be used with this electrical part.
MAX309ESE+T Features
4 Channels
Switch Circuit: SP4T
500μA Supply Current
MAX309ESE+T Applications
There are a lot of Maxim Integrated MAX309ESE+T Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- Signal routing between systems
- FTTH
- CSU
- Communication systems
- Optical Applications
- High-Voltage
- Cross Connects
- SONET/SDH ADM
- Cellular phones
