MAX309EUE+T

150ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX309 16 Pins 750pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX309EUE+T
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 643
Description: 150ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX309 16 Pins 750pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2002
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Max Power Dissipation	457mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX309
Pin Count	16
Operating Supply Voltage	28V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	30V
Min Supply Voltage	5V
Operating Supply Current	500μA
Throw Configuration	4PST
Propagation Delay	175 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	5V~30V ±5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	5V
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	750pA
Channel Capacitance (CS(off), CD(off))	3pF 26pF
On-state Resistance Match-Nom	1.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-92dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	150ns
Switch-off Time-Max	150ns
Signal Current-Max	0.03A
Height Seated (Max)	1.1mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX309EUE+T Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~85°C TA is the extended operating temperature. There are 16 terminations totally. The electronic part delivers high-quality output through its 4 channels. A 15V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the body of the electronic part. A SP4T switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. Try searching for the analog switch ic with MAX309 if you are looking for variants. The internal resistance of this digital multiplexer is 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 30V volts for the multiplexer. The analog switch ic is of the Dual, Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 5V. It would be sufficient to run this analogue multiplexer with 500μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 20V. You should attach at least 5V voltage if you are using dual power supply. The electronic component can function from 28V.