banner_page

MAX31091AUA/V+033

3.3V MAX31091 Clock Generators Automotive, AEC-Q100, EconOscillator? Series 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 3V~3.6V Tube


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX31091AUA/V+033
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 762
  • Description: 3.3V MAX31091 Clock Generators Automotive, AEC-Q100, EconOscillator? Series 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 3V~3.6V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
Published 2007
Series Automotive, AEC-Q100, EconOscillator™
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 33.3MHz
Base Part Number MAX31091
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Analog IC - Other Type ANALOG CIRCUIT
Input Clock
Ratio - Input:Output 1:1
PLL No
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Length 3mm
Width 3mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant

MAX31091AUA/V+033 Overview


The Tube method is used for packaging clock ICs. This clock generator is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. In it, there are 8 terminations to be found. For this clock generator ic, a voltage of 3.3V is required. Clock is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. Because of the Surface Mount, clock PLL can be easily mounted on the panel. It would be possible to supply this clock PLL with 3.6V of power. A maximum voltage of 3V should be used for this frequency generator for safety reasons. This clock PLL works with a supply voltage of 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to -40°C~125°C. The related electronic parts of part number MAX31091 are listed below. The frequency generator is equipped with 8 pins. This clock generator is a member of Automotive, AEC-Q100, EconOscillator? series. High efficiency is achieved when operating at a frequency of 33.3MHz. ANALOG CIRCUIT-RF synthesizers are analog integrated circuits that can be classified as analog ICs.

MAX31091AUA/V+033 Features


Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V

MAX31091AUA/V+033 Applications


There are a lot of Maxim Integrated MAX31091AUA/V+033 Clock Generators applications.

  • Automatic test equipment
  • Digital HDTV systems
  • VSAT (Small Ground Satellite Station)
  • Carrier synchronization in wired communication
  • High-speed optical transport network (OTN)
  • Remote telemetry and instrumentation
  • Digital logic circuits
  • Multiplexing communication
  • Infotainment systems
  • Quenching?

Write a review

Note: HTML is not translated!
    Bad           Good