MAX312CSE+T

225ns, 185ns SPST - NC 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX312 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX312CSE+T
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 677
Description: 225ns, 185ns SPST - NC 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX312 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX312
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	20V
Power Supplies	512/+-15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	30V
Min Supply Voltage	4.5V
Nominal Supply Current	5μA
Max Supply Current	100pA
Throw Configuration	SPST
Turn On Delay Time	275 ns
Voltage - Supply, Single/Dual (±)	4.5V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	235 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	10Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	15pF 15pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	225ns, 185ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	225ns
Switch-off Time-Max	185ns
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX312CSE+T Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around 0°C~70°C TA are extended for operation. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. As part of its design, the 16 series is equipped with this electronic component. A SPST - NC switching circuit is used to build these analog multiplexers. There are 4 circuits in this multiplexer. Using the MAX312 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 10Ohm. To find out what the 16 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 30V. The analog switch ic is of the Dual, Single supply type and is cost-effective. There should be 4.5V voltage fed to the electrical part below 4.5V. The analogue multiplexer may be damaged if voltage is greater than 100pA. Despite this switch's dual supply capability, its voltage should not exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. This analog switch ic utilizes SEPARATE OUTPUT output. The electronic component can function from 20V.