MAX312LEUE+

225ns, 185ns SPST - NC 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX312 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX312LEUE+
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 687
Description: 225ns, 185ns SPST - NC 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX312 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX312
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	30V
Min Supply Voltage	4.5V
Nominal Supply Current	5μA
Max Supply Current	200μA
Throw Configuration	SPST
Turn On Delay Time	275 ns
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	235 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	10Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	15pF 15pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	225ns, 185ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	225ns
Switch-off Time-Max	185ns
Normal Position	NC
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX312LEUE+ Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. An electrical component of this type can be found in the 16 series. Unlike digital switches, these are based on SPST - NC switching circuits. There are 4 circuits in this switch device. Using the MAX312 search parameter, you can discover variants of the switch. Analog switches have 10Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 4.5V is the lowest voltage that should be fed to the electronic electronic part. Putting voltage greater than 200μA on the multiplexer may cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. The voltage should be at least 4.5V if you are using dual power supplies. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 18V operating voltages can be used with this electrical part.