MAX313CPE+

225ns, 185ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX313 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX313CPE+
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 723
Description: 225ns, 185ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX313 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX313
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	512/+-15V
Number of Channels	1
Number of Circuits	4
Voltage - Supply, Single/Dual (±)	4.5V~30V ±4.5V~20V
Neg Supply Voltage-Nom (Vsup)	-15V
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	15pF 15pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	225ns, 185ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	275ns
Switch-off Time-Max	235ns
Drain to Source Resistance	10Ohm
Normal Position	NC
Length	19.175mm
Width	7.62mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2000
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)

MAX313CPE+ Overview

Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around 0°C~70°C TA. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 16 series. The analog switch ics are built using SPST - NO switching circuits. The multiplexer consists of 4 circuits. Try searching with MAX313 if you're looking for variants. The datasheets for the 16 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Drain to Source resistance for this electronic component is 10Ohm.