Parameters |
Max Supply Voltage |
30V |
Min Supply Voltage |
4.5V |
Power Dissipation |
696mW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
225 ns |
Voltage - Supply, Single/Dual (±) |
4.5V~30V ±4.5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
185 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
10Ohm |
Min Dual Supply Voltage |
4.5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
65 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
15pF 15pF |
On-state Resistance Match-Nom |
0.3Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
225ns, 185ns |
Charge Injection |
20pC |
Channel-to-Channel Matching (ΔRon) |
300m Ω |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
275ns |
Switch-off Time-Max |
235ns |
Drain to Source Resistance |
10Ohm |
Normal Position |
NC |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
10Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
696mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX313 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Number of Channels |
4 |
MAX313CSE Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to 0°C~70°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. The electrical component body receives 16 pins. A SPST - NO switching circuit is used for these analog switches. Search with MAX313 if you are looking for analog multiplexer variants. This digital multiplexer has 10Ohm internal resistance. The datasheets for the 16 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 30V in normal situations. Analog switch ics with Dual, Single supply type are cost-effective. 4.5V is the lowest voltage that should be fed to the electronic electronic part. A digital multiplexer may suffer damage if voltage is applied above 1μA. Despite this switch's dual supply capability, its voltage should not exceed 20V. With dual power supplies, you should attach at least 4.5V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Drain to Source resistance for this electronic component is 10Ohm.
MAX313CSE Features
4 Channels
Switch Circuit: SPST - NO
Drain-to-Source resistance: 10Ohm
MAX313CSE Applications
There are a lot of Maxim Integrated MAX313CSE Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Audio/video switches
- Precision test equipment
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Automotive applications
- Relay replacements
- Intelligent PBX
- 65 V DACs
- MP3 players
- RGB switches