MAX313CUE

225ns, 185ns SPST - NO 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX313 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX313CUE
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 710
Description: 225ns, 185ns SPST - NO 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX313 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2002
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	457mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX313
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	20V
Power Supplies	512/+-15V
Number of Channels	4
Max Supply Voltage	30V
Min Supply Voltage	4.5V
Nominal Supply Current	100pA
Max Supply Current	100pA
Throw Configuration	SPST
Turn On Delay Time	225 ns
Voltage - Supply, Single/Dual (±)	4.5V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	185 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	10Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	15pF 15pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	225ns, 185ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	275ns
Switch-off Time-Max	235ns
Normal Position	NC
Height	950μm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX313CUE Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 4 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. An injection of 16 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching for MAX313 variants of the analog switch ic. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. To find out what the 16 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 30V to a switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 4.5V should be the lowest voltage fed to the electronic component. It may damage the digital multiplexer if the voltage is higher than 100pA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. The voltage should be at least 4.5V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. 20V operating voltages can be used with this electrical part.