MAX313CUE-T

225ns, 185ns SPST - NO 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX313 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX313CUE-T
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 661
Description: 225ns, 185ns SPST - NO 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX313 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	2002
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	10Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX313
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	20V
Power Supplies	512/+-15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	30V
Min Supply Voltage	4.5V
Nominal Supply Current	100pA
Max Supply Current	100pA
Throw Configuration	SPST
Turn On Delay Time	225 ns
Voltage - Supply, Single/Dual (±)	4.5V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	185 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	10Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	15pF 15pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	225ns, 185ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	275ns
Switch-off Time-Max	235ns
Normal Position	NC
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX313CUE-T Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around 0°C~70°C TA. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. Into the electrical component body are injected 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. There are 4 circuits in this switch device. Try searching with MAX313 to find analog multiplexer variants. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. To find out what the 16 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. If you put voltage higher than 100pA on the digital multiplexer, damage may occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 20V. When using dual power supplies, you should attach at least 4.5V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. There is a voltage range of 20V operating voltages for the electrical part.