MAX313FEPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 10Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 842mW |
| Base Part Number | MAX313 |
| Operating Supply Voltage | 20V |
| Number of Circuits | 4 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 9V |
| Nominal Supply Current | 100pA |
| Max Supply Current | 100pA |
| Throw Configuration | SPST |
| Turn On Delay Time | 225 ns |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 185 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 10Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 20pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 225ns, 185ns |
| Charge Injection | 70pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -104dB @ 1MHz |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX313FEPE+ Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Through Hole. Multiplexer and demultiplexer circuits have a number 1:1. Extended operating temperature around -40°C~85°C TA. Based on SPST - NO switching circuits, these analog multiplexers work. There are 4 circuits in this multiplexer. Try searching for MAX313 variants of the analog switch ic. A 10Ohm internal resistance characterizes this multiplexer. A voltage higher than 36V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 9V. The switch multiplexer may be damaged if it is exposed to voltage greater than 100pA. Despite this switch's dual supply capability, its voltage should not exceed 20V. It is recommended that you attach at least 4.5V to your dual power supply. There is a voltage range of 20V operating voltages for the electrical part.
MAX313FEPE+ Features
Switch Circuit: SPST - NO
MAX313FEPE+ Applications
There are a lot of Maxim Integrated MAX313FEPE+ Analog Switches & Multiplexers ICs applications.
- CSU
- Video switching
- Central office
- Communications systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Fiber to the Home
- Cell phones
- Residential Gateways, Home Gateway/Router
- Cable PC
- ATM
