MAX313LCPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 4 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX313 |
| Output | SEPARATE OUTPUT |
| Qualification Status | Not Qualified |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 15pF 15pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 225ns, 185ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 325ns |
| Normal Position | NO |
| RoHS Status | ROHS3 Compliant |
MAX313LCPE+ Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Through Hole. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C TA. The total number of terminations is 16. Based on SPST - NO switching circuits, these analog multiplexers work. There are 4 circuits in this multiplexer. Use MAX313 to search for variants of the digital switches. Datasheets for functions of 16 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX313LCPE+ Features
Switch Circuit: SPST - NO
MAX313LCPE+ Applications
There are a lot of Maxim Integrated MAX313LCPE+ Analog Switches & Multiplexers ICs applications.
- PBXs
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Channelized and Unchannelized DS3 applications
- T1/E1 Terminals
- Microwave transmission systems
- Channel Banks
- Digital cross connects (DSX-1)
- Power routing
- ISDN NT1/TA
- Public switching systems
