MAX314CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX314 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 512/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 15pF 15pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 225ns, 185ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 275ns |
| Switch-off Time-Max | 235ns |
| Drain to Source Resistance | 10Ohm |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX314CPE+ Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have a number of circuits 1:1. Increasing operating temperature to around 0°C~70°C TA. In total, 16 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. Circuits number 4 make up this analogue multiplexer. MAX314 can be used to search for analog multiplexer variants. For details about the functions of 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. It has a Drain to Source resistance of 10Ohm ohms.
MAX314CPE+ Features
1 Channels
Switch Circuit: SPST - NO/NC
Drain-to-Source resistance: 10Ohm
MAX314CPE+ Applications
There are a lot of Maxim Integrated MAX314CPE+ Analog Switches & Multiplexers ICs applications.
- Communications systems
- Data switching
- Fiber to the Home
- Industrial
- Fiber In The Loop (FITL)
- Data Acquisition Systems
- Access Concentrators
- DSUs
- Industrial and process control systems
- Channelized and Unchannelized DS3 applications
