MAX3160EEAP+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3160 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Supply Current-Max | 5.5mA |
| Data Rate | 10Mbps |
| Differential Output | YES |
| Protocol | RS232, RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232; EIA-422; EIA-485 |
| Receive Delay-Max | 150 ns |
| Transmit Delay-Max | 800 ns |
| Output Low Current-Max | 0.0025A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 1.99mm |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3160EEAP+T Overview
Designed for common LEDs, this driver IC features an enhanced 20-SSOP (0.209, 5.30mm Width) package.The receiver is packaged in a Tape & Reel (TR) package.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.A Surface Mount-type PCB or development board can be used to place this wide receiver.A differential driver like this uses 3V~5.5V of power.This electronic part can have?up to 2/2 eligible receivers/drivers on the field at once.?Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.In this wide receiver, 20 terminations are integrated for driving and receiving signals from data.There are 20 pinouts available on this transceiver which are market standard.MAX3160 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.It provided a 1-bit resolution capability with this ic receiver.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.There is a subcategory named Line Driver or Receivers for this rf transceiver module.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 3.3/5V-pin power supply.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 5.5mA.
MAX3160EEAP+T Features
Tape & Reel (TR) package
20 pin count
3.3/5V power supply
MAX3160EEAP+T Applications
There are a lot of Maxim Integrated MAX3160EEAP+T Drivers/Receivers/Transceivers applications.
- Wireless interactive experience
- Car radio
- Televisions
- Military satellite communications
- Wireless projection application for conferences
- Precision engineering measurement
- Point-to-point networking
- Wireless 3D game
- Data center
- 1x/2x Fiber Channel
