MAX320CSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 35Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX320 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 200μA |
| Max Supply Current | 125μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 175 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 35Ohm |
| Min Dual Supply Voltage | 2.7V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switch-off Time-Max | 100ns |
| Drain to Source Resistance | 35Ohm |
| Voltage - Supply, Dual (V±) | ±2.7V~8V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX320CSA+ Overview
Presented in 8-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around 0°C~70°C TA are extended for operation. In total, 8 terminations have occurred. The electronic part provides high-quality output because it has 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. There is an electrical component included in the 8 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. It consists of 2 circuits. If you are looking for variants of the digital switch, trying search with MAX320. As far as internal resistance is concerned, it has 35Ohm. The datasheets for the 8 pins explain the functions. Digital switch that provides Dual power at a cost-effective price. In order to operate this switch device, it would need a current of 1μA. If put voltage greater than 125μA on the device, damage may be caused to the analogue multiplexer. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 2.7V. This electrical part is compatible with 8V operating voltages. The Drain to Source resistance of this electronic component is 35Ohm.
MAX320CSA+ Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
Drain-to-Source resistance: 35Ohm
MAX320CSA+ Applications
There are a lot of Maxim Integrated MAX320CSA+ Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Ultrasound
- SDH/SONET multiplexers
- Private Branch Exchange (PBX)
- T1/E1 Terminals
- Modems
- ISDN NT1/TA
- Cellular phones
- Low-Voltage
- Intelligent PBX
