MAX320ESA+
| Parameters | |
|---|---|
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 35Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±2.7V~8V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 35Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX320 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Power Supplies | +-5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 80μA |
| Max Supply Current | 80μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
MAX320ESA+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 8. As a result of its 1 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 8 pins are injected into the electrical part body. Multiplexers built on a SPST - NO switching circuit are built. This multiplexer is composed of 2 circuits. Use MAX320 to search for variants of the digital switches. As far as internal resistance is concerned, it has 35Ohm. To find out what the 8 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Analogue multiplexers of the Dual supply type that are cost-effective. 1μA current would be enough for this multiplexer to operate. A voltage higher than 80μA may cause damage to the switch multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 8V. When using dual power supplies, you should attach at least 2.7V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. The electronic component can function from 8V.
MAX320ESA+ Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
MAX320ESA+ Applications
There are a lot of Maxim Integrated MAX320ESA+ Analog Switches & Multiplexers ICs applications.
- PBXs
- Public switching systems
- Digital Cross-Connects
- Low-Voltage
- Fiber In The Loop (FITL)
- Data switching
- Automatic test equipment
- Microprocessor Controlled Analog Systems
- E1 Network Equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
