MAX321CSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 35Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX321 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 80μA |
| Max Supply Current | 80μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 35Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -85dB @ 1MHz |
| Voltage - Supply, Dual (V±) | ±2.7V~8V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX321CSA+ Overview
As the electronic part is packed in 8-SOIC (0.154, 3.90mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. The total number of terminations is 8. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 8 pins. Multiplexers built on a SPST - NC switching circuit are built. Circuits number 2 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX321. In this multiplexer, the internal resistance is 35Ohm. To find out what the 8 pins do, please refer to the datasheets. Analogue multiplexers of the Dual supply type that are cost-effective. An operating current of 1μA would be sufficient for this switch device. If put voltage greater than 80μA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. It is recommended that you attach at least 2.7V to your dual power supply. 8V operating voltages are supported by the electronic component.
MAX321CSA+ Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
MAX321CSA+ Applications
There are a lot of Maxim Integrated MAX321CSA+ Analog Switches & Multiplexers ICs applications.
- Isolation
- Data Acquisition Systems
- Access Concentrators
- Precision data acquisition
- DVD-R
- SONET
- Automatic test equipment
- Industrial control systems
- Avionics
- Cable PC
