MAX321ESA+T
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 35Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX321 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Operating Supply Voltage | 8V |
| Power Supplies | +-5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 80μA |
| Max Supply Current | 80μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 35Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±2.7V~8V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
MAX321ESA+T Overview
This electronic part is conveniently packaged in 8-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 8. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. An electrical component like this is included in the 8 series. On the other hand, analog switches can be constructed using SPST - NC switching circuits. The multiplexer consists of 2 circuits. Try searching with MAX321 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 35Ohm. It is a typical Multiplexer or Switches analog multiplexer. Analogue multiplexers of the Dual supply type that are cost-effective. The analogue multiplexer could operate on 1μA current. When the digital multiplexer is charged above 80μA, damage can occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 8V. When using dual power supplies, you should attach at least 2.7V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. There is a voltage range of 8V operating voltages for the electrical part.
MAX321ESA+T Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
MAX321ESA+T Applications
There are a lot of Maxim Integrated MAX321ESA+T Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- Remote wireless modules
- Cross Connects
- DVD-R
- Central office
- Low-Voltage
- PDAs
- Fault Tolerant Systems
- MP3 players
- Relay Replacement
