MAX3221EAE
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 130.010913mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX3221 |
| Pin Count | 16 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Operating Supply Current | 1mA |
| Number of I/O | 4 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 235Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Out Swing-Min | 5 V |
| Height | 1.78mm |
| Length | 6.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX3221EAE Overview
Due to the enhanced 16-SSOP (0.209, 5.30mm Width) package, this driver IC is excellent for driving common LEDs.The receiver is packaged in a Tube package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.This differential driver uses 3V~5.5V for power supply.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.Driver ICs in this category can operate efficiently with a supply voltage range of 3.3V.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.The transceiver is packaged with 16 market standard pinouts so that it can be easily used.This part number MAX3221 can be used to search for more variants based on the product type, temperature, package, etc.16-pin driver chip with enhanced power dissipation.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.It is important to note that this ic receiver had a maximum resolution of 1 bits.It is typical for this receiver to have a resolution of 1 bits when it is specified.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5.5V.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.The driver IC in this product is designed so that it can be powered by 3.3/5V.This IC implements 1 transceivers overall.With this integrating circuit you can drive LEDs of a voltage of up to 1mA. It can be used to drive large displays.There are 4 serial I/Os on board this IC, and it has a standard VGA interface.
MAX3221EAE Features
Tube package
16 pin count
16 pins
3.3/5V power supply
MAX3221EAE Applications
There are a lot of Maxim Integrated MAX3221EAE Drivers/Receivers/Transceivers applications.
- Wireless teaching
- Ship
- Desktop radio
- WDM transmission
- Notebook
- Fiber distributed data interface (FDDI)
- transmission relay
- High-speed computer links
- Structural bonding
- Wired telephone
