MAX3221ECDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX3221 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3221ECDB Overview
With the enhanced 16-SSOP (0.209, 5.30mm Width) package, this driver IC is excellent for driving common LEDs.In the Tube package, this receiver is mounted.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, this wide receiver can be placed.A power supply of 3V~5.5V is used by this differential driver.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 3.3V.Wide receiver has 16 terminations built in for driving or receiving signals from data.It is packaged with 16 pinouts that are market standard for this particular transceiver.Since the base part number MAX3221 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation driver IC with 16 pins.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.An input voltage supply of 5V is required to operate the transceiver module.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.In total, there are 1 transceivers implemented by this module isolated transceiver.This optical transceiver module also features the ALSO OPERATES AT 5V SUPPLY function, improving the overall signal management stability and accuracy.
MAX3221ECDB Features
Tube package
16 pin count
16 pins
MAX3221ECDB Applications
There are a lot of Texas Instruments MAX3221ECDB Drivers/Receivers/Transceivers applications.
- Wireless 3D game
- Sensor reporting
- Routers
- Cordless telephone
- Aircraft positioning
- Wireless access points
- Vehicle
- Datacom networking applications
- Switches
- Precision engineering measurement
