MAX3221EEAE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Current Rating | 300mA |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3221 |
| Pin Count | 16 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Number of I/O | 4 |
| Nominal Supply Current | 300μA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 1.99mm |
| Length | 6.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3221EEAE+ Overview
With the enhanced 16-SSOP (0.209, 5.30mm Width) package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tube package.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver uses 3V~5.5V for power supply.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.An operating voltage range of 3.3V is suitable for this line driver ic.In order to drive and receive signals from data, this wide receiver has 16 terminations integrated.There are 16 pinouts available on this transceiver which are market standard.Since the part number MAX3221 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control driver IC featuring 16 pins.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.There is a capability of 1-bit resolution with this ic receiver.It is typical for this receiver to have a resolution of 1 bits when it is specified.This transceiver module is designed to operate from an input voltage supply of 5.5V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.There is one driver IC that is designed to operate from a 3.3/5V power supply, and only one driver IC in total.There are 1 transceivers implemented in this module isolated transceiver.In this instance, there are a total of 4 serial input/output ports on the IC.
MAX3221EEAE+ Features
Tube package
16 pin count
16 pins
3.3/5V power supply
MAX3221EEAE+ Applications
There are a lot of Maxim Integrated MAX3221EEAE+ Drivers/Receivers/Transceivers applications.
- Fast Ethernet
- IPTV front end
- Switches
- Aircraft navigation
- Telecom applications
- Desktop radio
- Satellite communications networks
- Wireless communication
- Car alarm systems
- Interconnection between switches and computers
