MAX3221EIPWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX3221 |
| Pin Count | 16 |
| Output Voltage | 5.4V |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Drain to Source Resistance | 150Ohm |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3221EIPWG4 Overview
Due to the enhanced 16-TSSOP (0.173, 4.40mm Width) package, this driver IC is excellent for driving common LEDs.The receiver is packaged in a Tube package.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, this wide receiver can be placed.A power supply of 3V~5.5V is used by this differential driver.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.With a voltage range of 3.3V, this driver IC can operate efficiently.Integrated into this wide receiver are 16 terminations that are used for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.As the base part number MAX3221 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.It is a 16-pin driver IC with enhanced power dissipation controls.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.ICs implement a total of 1 transceivers.With the ALSO OPERATES AT 5V SUPPLY function, this optical transceiver module improves accuracy and stability of signal management overall.Using 5.4V as a voltage source, Wide receiver is able to deliver voltage.
MAX3221EIPWG4 Features
Tube package
16 pin count
16 pins
MAX3221EIPWG4 Applications
There are a lot of Texas Instruments MAX3221EIPWG4 Drivers/Receivers/Transceivers applications.
- Servers
- Shortwave receiver
- Ship
- Point-to-point networking
- Wireless security systems
- Bridges
- Wireless projection application for conferences
- Data center
- Wireless network systems
- Remote controls
