MAX3221IDBRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATE WITH 5V SUPPLY |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX3221 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 5V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3221IDBRE4 Overview
Designed for common LEDs, this driver IC features an enhanced 16-SSOP (0.209, 5.30mm Width) package.The Tape & Reel (TR) package houses this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, this wide receiver can be placed.With respect to the power supply, this differential driver uses 3V~5.5V.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.3.3V is the supply voltage range that this line driver ic can efficiently operate with.This integrated circuit has 16 terminations designed for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.MAX3221 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.16-pin driver chip with enhanced power dissipation.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.This receiver is typically specified with a resolution of 1 bits. There is a voltage input supply of 5V required for the operation of this integrated circuit.In total, there are 1 transceivers implemented by this module isolated transceiver.The ALSO OPERATE WITH 5V SUPPLY function of this optical transceiver module improves the overall stability and accuracy of signal management.
MAX3221IDBRE4 Features
Tape & Reel (TR) package
16 pin count
16 pins
MAX3221IDBRE4 Applications
There are a lot of Texas Instruments MAX3221IDBRE4 Drivers/Receivers/Transceivers applications.
- Telecom applications
- Satellite communication
- Wireless teaching
- Pocket PC
- Wireless HD Photography
- Notebook
- Wireless showroom
- Point-to-point networking
- Metro access rings
- LAN, SAN, WAN (local, storage, work area networks)
