MAX3221IPWR
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATE WITH 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX3221 |
| Pin Count | 16 |
| Output Voltage | 5.4V |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 60mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
MAX3221IPWR Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-TSSOP (0.173, 4.40mm Width) package.In this package, the receiver is mounted in the Cut Tape (CT) format.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.You can place this wide receiver to any Surface Mount-type PCB or development board.It takes 3V~5.5V from the power supply to run this differential driver.As many as 1/1 receivers/drivers are eligible for use on this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.With a supply voltage range of 3.3V, this line driver ic operates efficiently.16 terminations are integrated into this wide receiver for driving and receiving signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.The base part number MAX3221 identifies the product type, temperature, package, etc., so you can search for more variants by using it.The driver IC has improved power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.It provided a 1-bit resolution capability with this ic receiver.An input voltage supply of 5V is required to operate the transceiver module.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.The module isolated transceiver contains 1 receivers.ICs with ALSO OPERATE WITH 5V SUPPLY functions also improve the overall stability and accuracy of signal management.There is a capabilWide receivery to deliver voltage at 5.4V wWide receiverh this device.In this bluetooth transceiver, the output current is rated at 60mA.
MAX3221IPWR Features
Cut Tape (CT) package
16 pin count
16 pins
MAX3221IPWR Applications
There are a lot of Texas Instruments MAX3221IPWR Drivers/Receivers/Transceivers applications.
- IPTV front end
- Wired telephone
- Point-to-point networking
- Metro access rings
- Precision engineering measurement
- WDM transmission
- Carrier phase observations
- Wireless interactive experience
- Laser diode bonding
- Wireless network systems
