MAX3222CDW
| Parameters | |
|---|---|
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX3222 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 2.65mm |
| Length | 12.8mm |
MAX3222CDW Overview
This driver chip is excellent for driving common LEDs due to its enhanced 20-SOIC (0.295, 7.50mm Width) package.This receiver is mounted in the Tube package.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.A Surface Mount-type PCB or development board can be used to place this wide receiver.A differential driver like this uses 3V~5.5V of power.As many as 2/2 eligible receivers/drivers can be used simultaneously with this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.Driver ICs with a supply voltage range of 3.3V can operate efficiently.In this wide receiver, 20 terminations are integrated for driving and receiving signals from data.The transceiver is packaged with 20 market standard pinouts so that it can be easily used.For more variants of this part, try searching with the base part number MAX3222, which indicates the product type, temperature, package, etc.20-pin driver IC with improved power dissipation control.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.ICs implement a total of 1 transceivers.The part is embedded with 2 drivers, so it can be used with 2 devices.Additionally, this optical transceiver module features the ALSO OPERATES AT 5V SUPPLY function, which improves the stability and accuracy of signal management in general.
MAX3222CDW Features
Tube package
20 pin count
20 pins
MAX3222CDW Applications
There are a lot of Texas Instruments MAX3222CDW Drivers/Receivers/Transceivers applications.
- Switching system
- Wireless interactive experience
- Changeing the frequency from IF to RF
- Optical sub-assembly (OSA)
- Bridges
- Satellite communication
- Cable network front end
- Transmission stations
- Desktop PC
- Precision geodetic measurement
