MAX3222CWN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3222 |
| Pin Count | 18 |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Height | 2.35mm |
| Length | 11.75mm |
| Width | 7.6mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3222CWN+ Overview
The enhanced 18-SOIC (0.295, 7.50mm Width) package makes it an excellent LED driver.Tube package is used to mount this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.On any Surface Mount-type PCB or development board, this wide receiver can be placed.With respect to the power supply, this differential driver uses 3V~5.5V.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.With a voltage range of 3.3V, this driver IC can operate efficiently.In this wide receiver, 18 terminations are integrated for driving and receiving signals from data.In this package, you will find 18 market-standard pinouts for this transceiver.For more variants of this part, try searching with the base part number MAX3222, which indicates the product type, temperature, package, etc.18-pin driver chip with enhanced power dissipation.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.It is designed to be operated from a 3.3/5V power supply, so the module isolated transceiver will work effectively.It implements 1 transceivers in total.This electronic part can have?up to 2 eligible drivers on the field at once.?There are 8 standard serial I/O ports on this IC, which makes it a very versatile one.
MAX3222CWN+ Features
Tube package
18 pin count
18 pins
3.3/5V power supply
MAX3222CWN+ Applications
There are a lot of Maxim Integrated MAX3222CWN+ Drivers/Receivers/Transceivers applications.
- Remote controls
- Switches
- Fiber optic cable connection network
- Cordless telephone
- Metro access rings
- Mainframes, workstations or storage devices
- Transmission stations
- Satellite ground stations
- Gigabit Ethernet
- Optical sub-assembly (OSA)
