MAX3222ECAP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 453.59237mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3222 |
| Pin Count | 20 |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Operating Supply Current | 1mA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 1.78mm |
| Length | 7.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3222ECAP+ Overview
LED drivers benefit from this IC's enhanced 20-SSOP (0.209, 5.30mm Width) package.Tube package is used to mount this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver requires a 3V~5.5V power supply.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.Driver ICs with a supply voltage range of 3.3V can operate efficiently.For driving and receiving signals from data, this wide receiver has 20 terminations integrated.It is packaged with 20 pinouts that are market standard for this particular transceiver.This part number MAX3222 can be used to search for more variants based on the product type, temperature, package, etc.A 20-pin driver IC with enhanced power dissipation control is featured here.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.There is usually a 2-bit resolution specified for this receiver when it is used.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.It is designed so that it can be operated from a 3.3/5V power supply with this driver IC.There are 1 transceivers in total that this module isolated transceiver implements.On the integrator circuit are embedded 2 drivers.It has the ability to drive LEDs with an input voltage of up to about 1mA with the help of this integrating circuit.
MAX3222ECAP+ Features
Tube package
20 pin count
20 pins
3.3/5V power supply
MAX3222ECAP+ Applications
There are a lot of Maxim Integrated MAX3222ECAP+ Drivers/Receivers/Transceivers applications.
- Notebook
- Fast Ethernet
- High-speed computer links
- Ethernet circuitry
- Car alarm systems
- Fiber distributed data interface (FDDI)
- Clock radio
- Single to Multimode Fiber Conversion
- Wireless modems
- Desktop PC
