MAX3222ECWN+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3222 |
| Pin Count | 18 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Supply Current-Max | 1mA |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232; TIA-232; V.24; V.28 |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3222ECWN+T Overview
LED drivers with the enhanced 18-SOIC (0.295, 7.50mm Width) package will be able to drive a variety of common LEDs with ease.In this package, the receiver is mounted in the Tape & Reel (TR) format.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.Power supply requirements for this differential driver are 3V~5.5V.As many as 2/2 eligible receivers/drivers can be used simultaneously with this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.3.3V is the supply voltage range that this line driver ic can efficiently operate with.For driving and receiving signals from data, this wide receiver has 18 terminations integrated.The pinouts for this transceiver are standardized to meet the needs of the market.As the base part number MAX3222 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.18-pin driver IC with improved power dissipation control.It is important to note that this ic receiver had a maximum resolution of 2 bits.It is typical for this receiver to have a resolution of 2 bits when it is specified.There is a subcategory called Line Driver or Receivers for this rf transceiver module.Driver ICs are designed to work with a 3.3/5V power supply and this driver IC is one of them.There should be enough current supplied to the VCC pin of the part, but not more than 1mA.
MAX3222ECWN+T Features
Tape & Reel (TR) package
18 pin count
18 pins
3.3/5V power supply
MAX3222ECWN+T Applications
There are a lot of Maxim Integrated MAX3222ECWN+T Drivers/Receivers/Transceivers applications.
- Wireless transmission
- Military satellite communications
- AV receiver
- Tuner
- Satellite ground stations
- Wireless access points
- Wireless network systems
- Automation systems
- Satellite radio receiver
- Indoor ad hoc meeting
