MAX3222EEAP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3222 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Supply Current-Max | 1mA |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232; TIA-232; V.24; V.28 |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 1.99mm |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3222EEAP+ Overview
Designed for common LEDs, this driver IC features an enhanced 20-SSOP (0.209, 5.30mm Width) package.Tube package is used for this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.A Surface Mount-type PCB or development board can be used to place this wide receiver.A power supply of 3V~5.5V is used by this differential driver.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.A package consisting of 20 market standard pinouts is provided with this integrated circuit.This part number MAX3222 can be used to search for more variants based on the product type, temperature, package, etc.20-pin driver chip with enhanced power dissipation.This ic receiver provided a 2-bit resolution capability. There is typically a resolution of 2 bits specified with this receiver.There is a subcategory called Line Driver or Receivers for this rf transceiver module.IC3.3/5V is a high performance driver IC designed to work with a 3.3/5V power supply.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 1mA of input current.
MAX3222EEAP+ Features
Tube package
20 pin count
20 pins
3.3/5V power supply
MAX3222EEAP+ Applications
There are a lot of Maxim Integrated MAX3222EEAP+ Drivers/Receivers/Transceivers applications.
- Long-distance fiber optic network applications
- Pocket PC
- Ethernet circuitry
- Satellite communication
- Ship
- Sensor reporting
- TV signal transmission
- Tuner
- Satellite radio receiver
- Low power, low voltage systems
