MAX3222EIPWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX3222 |
| Pin Count | 20 |
| Output Voltage | 5.4V |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 500kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Drain to Source Resistance | 300Ohm |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3222EIPWG4 Overview
This driver chip is excellent for driving common LEDs due to its enhanced 20-TSSOP (0.173, 4.40mm Width) package.In this package, the receiver is mounted in the Tube format.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.It takes 3V~5.5V from the power supply to run this differential driver.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.With a voltage range of 3.3V, this driver IC can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.In this package, you will find 20 market-standard pinouts for this transceiver.Since the base part number MAX3222 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation control driver IC featuring 20 pins.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.This receiver is typically specified with a resolution of 2 bits. There are two types of input voltage supply available for this IC, 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.There are 1 transceivers in total implemented by this IC.On the integrator circuit are embedded 2 drivers.This optical transceiver module also features the ALSO OPERATES AT 5V SUPPLY function, improving the overall signal management stability and accuracy.There is a capabilWide receivery to deliver voltage at 5.4V wWide receiverh this device.
MAX3222EIPWG4 Features
Tube package
20 pin count
20 pins
MAX3222EIPWG4 Applications
There are a lot of Texas Instruments MAX3222EIPWG4 Drivers/Receivers/Transceivers applications.
- Wireless transmission
- Thermal management
- Changeing the frequency from IF to RF
- Laser diode bonding
- Cell phones
- Low power, low voltage systems
- Military satellite communications
- Mainframes, workstations or storage devices
- IPTV front end
- Remote controls
