MAX3223CAP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 453.59237mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3223 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Interface | RS-232 |
| Operating Supply Current | 1mA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Simplex/Duplex | Full Duplex |
| Height | 1.78mm |
| Length | 7.33mm |
| Width | 5.38mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3223CAP+ Overview
An excellent driver IC for common LEDs thanks to its enhanced 20-SSOP (0.209, 5.30mm Width) package.Tube package is used for this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 3V~5.5V.This electronic part can have?up to 2/2 eligible receivers/drivers on the field at once.?In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.3.3V is the supply voltage range that this line driver ic can efficiently operate with.For driving and receiving signals from data, this wide receiver has 20 terminations integrated.This transceiver is packaged with 20 market standard pinoutsSince the base part number MAX3223 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An enhanced power dissipation control is provided by this 20-pin driver IC.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.As a general rule, this receiver has a resolution of 2 bits that is usually specified.This transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.This electronic part can have?up to 2 eligible drivers on the field at once.?An input voltage of 1mA is recommended for this integrating circuit to be able to drive LEDs.
MAX3223CAP+ Features
Tube package
20 pin count
20 pins
MAX3223CAP+ Applications
There are a lot of Maxim Integrated MAX3223CAP+ Drivers/Receivers/Transceivers applications.
- High-speed computer links
- Desktop PC
- Wireless projection application for conferences
- Data center
- Gigabit Ethernet
- Radio transmission
- Changeing the frequency from IF to RF
- Wired telephone
- Cable network front end
- WDM transmission
