MAX3223CDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX3223 |
| Pin Count | 20 |
| Output Voltage | 5.4V |
| Operating Supply Voltage | 5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3223CDB Overview
Designed for common LEDs, this driver IC features an enhanced 20-SSOP (0.209, 5.30mm Width) package.This receiver is mounted in the Tube package.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver requires a 3V~5.5V power supply.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.With a voltage range of 3.3V, this driver IC can operate efficiently.In this wide receiver, 20 terminations are integrated for driving and receiving signals from data.This transceiver is packaged with 20 market standard pinoutsSince the base part number MAX3223 describes the product type, temperature, package, etc., you might get more options by searching with it.Wide receiver with enhanced power dissipation control, 20-pin.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.In the case of this receiver, a resolution of 2 bits is typically specified.There are two types of input voltage supply available for this IC, 5V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.The integrator circuit has embedded 2 drivers.A CAN ALSO OPERATE WITH 5V SUPPLY function is also included in this optical transceiver module, which improves stability and accuracy of signal management.This integrating circuit is able to drive LEDs with an input voltage of 1mA.Wide receiver provides the output voltage of 5.4V.
MAX3223CDB Features
Tube package
20 pin count
20 pins
MAX3223CDB Applications
There are a lot of Texas Instruments MAX3223CDB Drivers/Receivers/Transceivers applications.
- Remote controls
- VoIP phones
- Switches
- LAN, SAN, WAN (local, storage, work area networks)
- Ship
- Long-distance fiber optic network applications
- Indoor ad hoc meeting
- Wired telephone
- Wireless projection application for business talks
- Single to Multimode Fiber Conversion
