MAX3223CPP+
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3223 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Supply Current-Max | 1mA |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Interface Standard | EIA-232; TIA-232; V.24; V.28 |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| High Level Input Current-Max | 0.000001A |
| Height Seated (Max) | 4.572mm |
| Length | 26.16mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
MAX3223CPP+ Overview
LED drivers with the enhanced 20-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.The Tube package houses this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.You can place this wide receiver to any Through Hole-type PCB or development board.In terms of power supply, this differential driver utilizes 3V~5.5V.As many as 2/2 receivers/drivers are eligible for use on this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.Driver ICs in this category can operate efficiently with a supply voltage range of 3.3V.For driving and receiving signals from data, this wide receiver has 20 terminations integrated.The transceiver is packaged with 20 market standard pinouts so that it can be easily used.As the base part number MAX3223 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.It is a 20-pin driver IC with enhanced power dissipation controls.An important feature of this ic receiver was its 2-bit resolution capability.This receiver is typically specified with a resolution of 2 bits. There is a subcategory called Line Driver or Receivers for this rf transceiver module.Driver ICs are designed to work with a 3.3/5V power supply and this driver IC is one of them.The VCC pin of the ic receiver should receive enough but not more than 1mA of input current.
MAX3223CPP+ Features
Tube package
20 pin count
20 pins
3.3/5V power supply
MAX3223CPP+ Applications
There are a lot of Maxim Integrated MAX3223CPP+ Drivers/Receivers/Transceivers applications.
- Precision geodetic measurement
- Notebook
- Laser diode bonding
- Fast Ethernet
- Desktop PC
- Copper connection network
- Wireless projection application for conferences
- Indoor ad hoc meeting
- Wireless security systems
- Wireless teaching
