MAX3223ECAP+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3223 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Supply Current-Max | 1mA |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232; TIA-232; V.24; V.28 |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 1.99mm |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3223ECAP+T Overview
This LED driver IC features an enhanced 20-SSOP (0.209, 5.30mm Width) package for driving common LEDs.The package of this receiver is Tape & Reel (TR).With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.You can place this wide receiver to any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 3V~5.5V.The field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.Wide receiver can operate within the range of 3.3V supply voltages efficiently.For driving and receiving signals from data, this wide receiver has 20 terminations integrated.The transceiver is packaged with 20 market standard pinouts so that it can be easily used.The base part number MAX3223 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An important feature of this ic receiver was its 2-bit resolution capability.In the case of this receiver, a resolution of 2 bits is typically specified.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.IC3.3/5V is a high performance driver IC designed to work with a 3.3/5V power supply.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 1mA of input current.
MAX3223ECAP+T Features
Tape & Reel (TR) package
20 pin count
3.3/5V power supply
MAX3223ECAP+T Applications
There are a lot of Maxim Integrated MAX3223ECAP+T Drivers/Receivers/Transceivers applications.
- Satellite communication
- Interconnection between switches and computers
- Wireless 3D game
- Televisions
- Desktop radio
- Clock radio
- Routers
- Indoor ad hoc meeting
- Cell phones
- Carrier phase observations
