MAX3223ECDB
| Parameters | |
|---|---|
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX3223 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 500kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
MAX3223ECDB Overview
This LED driver IC features an enhanced 20-SSOP (0.209, 5.30mm Width) package for driving common LEDs.This receiver is mounted in the Tube package.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver requires a 3V~5.5V power supply.This electronic part can have?up to 2/2 eligible receivers/drivers on the field at once.?The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.An operating voltage range of 3.3V is suitable for this line driver ic.The integrated terminations of this wide receiver allow it to drive and receive signals from data.As a standard package, this transceiver comes with a 20-pin layout that follows the market standard.Since the base part number MAX3223 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.It is a 20-pin driver IC with enhanced power dissipation controls.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In the case of this receiver, a resolution of 2 bits is typically specified.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.The module isolated transceiver implements a total of 1 transceivers.On the part, 2 drivers are embedded in order to facilitate the operation of the device.Additionally, the optical transceiver module's ALSO OPERATES AT 5V SUPPLY function provides improved signal management accuracy and stability.
MAX3223ECDB Features
Tube package
20 pin count
20 pins
MAX3223ECDB Applications
There are a lot of Texas Instruments MAX3223ECDB Drivers/Receivers/Transceivers applications.
- Cell phones
- Portable radio
- Aircraft positioning
- Single to Multimode Fiber Conversion
- Wireless security systems
- Wireless teaching
- Metro access rings
- Car radio
- Radio transmission
- Switches
