MAX3223ECDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX3223 |
| Pin Count | 20 |
| Power Supplies | 3.3/5V |
| Number of I/O | 8 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 500kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3223ECDW Overview
An excellent driver IC for common LEDs thanks to its enhanced 20-SOIC (0.295, 7.50mm Width) package.The Tube package houses this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.You can place this wide receiver to any Surface Mount-type PCB or development board.It takes 3V~5.5V from the power supply to run this differential driver.As many as 2/2 receivers/drivers are eligible for use on this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 3.3V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.ICs that are packaged with market standard pinouts are available on the market.You can search with MAX3223 to get more variants of this part, since it identifies the product type, temperature, package, etc.20-pin driver IC with improved power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.It is typical for this receiver to have a resolution of 2 bits when it is specified.There is a subcategory named Line Driver or Receivers for this rf transceiver module.Driver ICs are designed to work with a 3.3/5V power supply and this driver IC is one of them.This IC implements 1 transceivers overall.This electronic part can have?up to 2 eligible drivers on the field at once.?The ALSO OPERATES AT 5V SUPPLY function of this optical transceiver module improves the overall stability and accuracy of signal management.A 8-serial I/O IC is available which provides a standard interface for serial communication.
MAX3223ECDW Features
Tube package
20 pin count
20 pins
3.3/5V power supply
MAX3223ECDW Applications
There are a lot of Texas Instruments MAX3223ECDW Drivers/Receivers/Transceivers applications.
- Wireless security systems
- IPTV front end
- Copper connection network
- Satellite ground stations
- Satellite communications networks
- Satellite radio receiver
- Single fiber bidirectional application
- Wireless smart house
- Military satellite communications
- Wireless interactive experience
