MAX3223ECUP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3223 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Supply Current-Max | 1mA |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232; TIA-232; V.24; V.28 |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 1.1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3223ECUP+ Overview
This driver chip is excellent for driving common LEDs due to its enhanced 20-TSSOP (0.173, 4.40mm Width) package.The Tube package houses this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply for this differential driver is 3V~5.5V.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.Wide receiver can operate within the range of 3.3V supply voltages efficiently.Integrated into this wide receiver are 20 terminations that are used for driving and receiving signals from data.As a standard package, this transceiver comes with a 20-pin layout that follows the market standard.With the part number MAX3223 identifying the product type, temperature, package, etc., you can search with it to see more variants.A 20-pin driver IC with enhanced power dissipation control is featured here.It was possible to achieve a 2-bit resolution through this ic receiver.Typically, the resolution of this receiver is specified to be 2 bits.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.There is one driver IC in this package which is intended to be operated by 3.3/5V of power.A sufficient amount of input current should be provided to the optical transceiver module's VCC pin, but not more than 1mA.
MAX3223ECUP+ Features
Tube package
20 pin count
20 pins
3.3/5V power supply
MAX3223ECUP+ Applications
There are a lot of Maxim Integrated MAX3223ECUP+ Drivers/Receivers/Transceivers applications.
- Gigabit Ethernet
- Carrier phase observations
- Low power, low voltage systems
- Interconnection between switches and computers
- Clock radio
- LAN, SAN, WAN (local, storage, work area networks)
- Ethernet circuitry
- Fiber optic cable connection network
- Copper connection network
- Satellite communications networks
