MAX3223EUP+
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3223 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Supply Current-Max | 1mA |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Interface Standard | EIA-232; V.24; V.28 |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 5 V |
| Height Seated (Max) | 1.1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
MAX3223EUP+ Overview
LED drivers with the enhanced 20-TSSOP (0.173, 4.40mm Width) package will be able to drive a variety of common LEDs with ease.Tube package is used for this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.This wide receiver can be placed on any Surface Mount-type PCB or development board.Power supply for this differential driver is 3V~5.5V.Up to 2/2 receivers/drivers can be installed simultaneously on this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.This line driver ic can operate efficiently with a supply voltage range of 3.3V.This integrated circuit has 20 terminations designed for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.Since the base part number MAX3223 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An enhanced power dissipation control driver IC featuring 20 pins.As a result of the ic receiver, the resolution of the driver was increased to 2 bits.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.Driver ICs are designed to work with a 3.3/5V power supply and this driver IC is one of them.To power the ic receiver, sufficient current but not more than 1mA should be supplied to its VCC pin.
MAX3223EUP+ Features
Tube package
20 pin count
20 pins
3.3/5V power supply
MAX3223EUP+ Applications
There are a lot of Maxim Integrated MAX3223EUP+ Drivers/Receivers/Transceivers applications.
- Switches
- Copper connection network
- Servers
- Thermal management
- transmission relay
- Wireless network systems
- Structural bonding
- SONET/SDH Network
- Cordless telephone
- Wireless access points
