MAX3225EEAP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 453.59237mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3225 |
| Pin Count | 20 |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 300μA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Transceivers | 1 |
| Number of Receivers | 2 |
| Height | 1.78mm |
| Length | 7.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3225EEAP+ Overview
Due to the enhanced 20-SSOP (0.209, 5.30mm Width) package, this driver IC is excellent for driving common LEDs.Tube package is used to mount this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.Any Surface Mount-type PCB or development board can be used with this wide receiver.A power supply of 3V~5.5V is used by this differential driver.This electronic part can have?up to 2/2 eligible receivers/drivers on the field at once.?IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.With a supply voltage range of 3.3V, this line driver ic operates efficiently.20 terminations are integrated into this wide receiver for driving and receiving signals from data.There are 20 pinouts available on this transceiver which are market standard.With the part number MAX3225 identifying the product type, temperature, package, etc., you can search with it to see more variants.It is a 20-pin driver IC with enhanced power dissipation controls.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.As a result of the ic receiver, the resolution of the driver was increased to 2 bits.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.It is designed to be operated from a 3.3/5V power supply, so the module isolated transceiver will work effectively.This IC implements 1 transceivers overall.In module isolated transceiver are 2 receivers.It has the ability to drive LEDs with an input voltage of up to about 1mA with the help of this integrating circuit.
MAX3225EEAP+ Features
Tube package
20 pin count
20 pins
3.3/5V power supply
MAX3225EEAP+ Applications
There are a lot of Maxim Integrated MAX3225EEAP+ Drivers/Receivers/Transceivers applications.
- Cell phones
- Ethernet circuitry
- 1x/2x Fiber Channel
- Gigabit Ethernet
- Structural bonding
- interconnection between switches
- Sensor reporting
- Broadcast application
- Wireless showroom
- Changeing the frequency from IF to RF
