MAX3226ECUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3226 |
| Pin Count | 16 |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Number of I/O | 4 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX3226ECUE+ Overview
This LED driver IC features an enhanced 16-TSSOP (0.173, 4.40mm Width) package for driving common LEDs.The receiver is packaged in a Tube package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver requires a 3V~5.5V power supply.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.With a voltage range of 3.3V, this driver IC can operate efficiently.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.This transceiver is packaged with 16 market standard pinoutsThis part number MAX3226 can be used to search for more variants based on the product type, temperature, package, etc.This is a 16-pin driver IC with enhanced power dissipation control.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.Driver ICs such as this one are designed to operate from 3.3/5V power sources.In total, there are 1 transceivers implemented by this module isolated transceiver.This is an IC that comes with a total of 4 standard serial I/O ports.
MAX3226ECUE+ Features
Tube package
16 pin count
16 pins
3.3/5V power supply
MAX3226ECUE+ Applications
There are a lot of Maxim Integrated MAX3226ECUE+ Drivers/Receivers/Transceivers applications.
- AV receiver
- transmission relay
- Switches
- Cell phones
- Precision geodetic measurement
- Single fiber bidirectional application
- Tuner
- Broadcast application
- Copper connection network
- Wireless access points
