MAX3226EEAE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3226 |
| Pin Count | 16 |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Number of I/O | 4 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Length | 6.2mm |
| Width | 5.29mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3226EEAE+T Overview
Due to the enhanced 16-SSOP (0.209, 5.30mm Width) package, this driver IC is excellent for driving common LEDs.In the Tape & Reel (TR) package, this receiver is mounted.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 3V~5.5V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.With a supply voltage range of 3.3V, this line driver ic operates efficiently.Wide receiver has 16 terminations built in for driving or receiving signals from data.A package consisting of 16 market standard pinouts is provided with this integrated circuit.Since the base part number MAX3226 describes the product type, temperature, package, etc., you might get more options by searching with it.Wide receiver with enhanced power dissipation control, 16-pin.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.An important feature of this ic receiver was its 1-bit resolution capability.Typically, the resolution of this receiver is specified to be 1 bits.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.Driver ICs are designed to work with a 3.3/5V power supply and this driver IC is one of them.There are 1 transceivers in total that this module isolated transceiver implements.This is an IC with 4 standard serial I/O capabilities.
MAX3226EEAE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
3.3/5V power supply
MAX3226EEAE+T Applications
There are a lot of Maxim Integrated MAX3226EEAE+T Drivers/Receivers/Transceivers applications.
- Sensor reporting
- Interconnection between switches and computers
- interconnection between computers
- Bar, KTV wireless entertainment
- Mainframes, workstations or storage devices
- Gigabit Ethernet
- Switching system
- Wireless smart house
- Single fiber bidirectional application
- Long-distance fiber optic network applications
