MAX3227EAE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3227 |
| Pin Count | 16 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.3/5V |
| Number of I/O | 4 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Length | 6.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3227EAE+T Overview
LED drivers benefit from this IC's enhanced 16-SSOP (0.209, 5.30mm Width) package.There is a Tape & Reel (TR) package for this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.The wide receiver can be mounted on any Surface Mount-type PCB or development board.It takes 3V~5.5V from the power supply to run this differential driver.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.Driver ICs with a supply voltage range of 3.3V can operate efficiently.This wide receiver has 16 terminations for driving and receiving data signals.ICs that are packaged with market standard pinouts are available on the market.Since the base part number MAX3227 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation driver IC with 16 pins.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.This transceiver module is designed to operate from an input voltage supply of 5.5V.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.Driver ICs are designed to work with a 3.3/5V power supply and this driver IC is one of them.This IC implements 1 transceivers overall.There are 4 standard serial I/O ports on this IC, which makes it a very versatile one.
MAX3227EAE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
3.3/5V power supply
MAX3227EAE+T Applications
There are a lot of Maxim Integrated MAX3227EAE+T Drivers/Receivers/Transceivers applications.
- Wireless projection application for business talks
- Carrier phase observations
- Pocket PC
- Aircraft positioning
- TV signal transmission
- Broadcast application
- AV receiver
- Vehicle
- Precision engineering measurement
- Satellite ground stations
