MAX322CSA+

150ns, 100ns SPST - NO/NC 35Ohm Analog Switches BREAK-BEFORE-MAKE MAX322 8 Pins 100pA 5V 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX322CSA+
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 192
Description: 150ns, 100ns SPST - NO/NC 35Ohm Analog Switches BREAK-BEFORE-MAKE MAX322 8 Pins 100pA 5V 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	35Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	471mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX322
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	8V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	80μA
Max Supply Current	200μA
Throw Configuration	SPST
Turn On Delay Time	175 ns
Supply Type	Dual
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	2.7V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	150ns, 100ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	100ns
Voltage - Supply, Dual (V±)	±2.7V~8V
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX322CSA+ Overview

Shipping overseas is convenient with the electronic component packed in 8-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around 0°C~70°C TA. Total terminations are 8. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. A key feature of the 8 series is the inclusion of this electronic part as part of its design. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. There are 2 circuits in this multiplexer. Try searching for the analog switch ic with MAX322 if you are looking for variants. As far as internal resistance is concerned, it has 35Ohm. For functions related to 8 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 8V. Digital switch that provides Dual power at a cost-effective price. 2.7V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 1μA current. A digital multiplexer may suffer damage if voltage is applied above 200μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 8V. For dual power supplies, a voltage of at least 2.7V should be attached. This analog switch ic utilizes SEPARATE OUTPUT output.