MAX322CUA+

150ns, 100ns SPST - NO/NC 35Ohm Analog Switches BREAK-BEFORE-MAKE MAX322 8 Pins 100pA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX322CUA+
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 423
Description: 150ns, 100ns SPST - NO/NC 35Ohm Analog Switches BREAK-BEFORE-MAKE MAX322 8 Pins 100pA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	35Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	330mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX322
Output	SEPARATE OUTPUT
Pin Count	8
Power Supplies	+-5V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	8V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	80μA
Max Supply Current	125μA
Throw Configuration	SPST
Turn On Delay Time	150 ns
Supply Type	Dual
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	150ns, 100ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Dual (V±)	±2.7V~8V
Height	910μm
Length	3.05mm
Width	3.05mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX322CUA+ Overview

This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around 0°C~70°C TA are extended for operation. Total terminations are 8. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 8 pins are injected into the body of the electronic part. A SPST - NO/NC switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 2. MAX322 can be used to search for analog multiplexer variants. This digital multiplexer has 35Ohm internal resistance. The functions of 8 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 8V. The analog switch ic is of the Dual supply type and is cost-effective. 2.7V should be the lowest voltage fed to the electronic component. 1μA current would be enough for this multiplexer to operate. The switch multiplexer may be damaged if it is exposed to voltage greater than 125μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. You should attach at least 2.7V voltage if you are using dual power supply. There are SEPARATE OUTPUT outputs on this analog switch ic.