MAX3232CPWE4
| Parameters | |
|---|---|
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX3232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
MAX3232CPWE4 Overview
The enhanced 16-TSSOP (0.173, 4.40mm Width) package makes it an excellent LED driver.The Tube package contains this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver requires a 3V~5.5V power supply.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at 0°C~70°C.3.3V is the supply voltage range that this line driver ic can efficiently operate with.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.Since the base part number MAX3232 describes the product type, temperature, package, etc., you might get more options by searching with it.16-pin driver chip with enhanced power dissipation.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.Typically, the resolution of this receiver is specified to be 2 bits.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.Driver ICs such as this one are designed to operate from 3.3/5V power sources.There are 1 transceivers in total implemented by this IC.The integrator circuit comes with embedded 2 drivers.A CAN ALSO OPERATE WITH 5V SUPPLY function is also included in this optical transceiver module, which improves stability and accuracy of signal management.There are 8 serial I/Os on board this IC, and it has a standard VGA interface.
MAX3232CPWE4 Features
Tube package
16 pin count
16 pins
3.3/5V power supply
MAX3232CPWE4 Applications
There are a lot of Texas Instruments MAX3232CPWE4 Drivers/Receivers/Transceivers applications.
- SONET/SDH Network
- Satellite ground stations
- Ship
- Optical sub-assembly (OSA)
- TV signal transmission
- Switches
- interconnection between switches
- Fiber distributed data interface (FDDI)
- Datacom networking applications
- Indoor ad hoc meeting
