MAX3232CWE+T
| Parameters | |
|---|---|
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3232 |
| Pin Count | 16 |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 235Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
MAX3232CWE+T Overview
Due to the enhanced 16-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.There is a Tape & Reel (TR) package for this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver uses 3V~5.5V for power supply.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.Driver ICs with a supply voltage range of 5V can operate efficiently.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.As the base part number MAX3232 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation control driver IC featuring 16 pins.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.This receiver is typically specified with a resolution of 2 bits. In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.Driver ICs such as this one are designed to operate from 3.3/5V power sources.In total, there are 1 transceivers implemented by this module isolated transceiver.This electronic part can have?up to 2 eligible drivers on the field at once.?Additionally, the optical transceiver module's EXTERNAL CHARGE PUMP function provides improved signal management accuracy and stability.There are 8 standard serial I/O ports on this IC, which makes it a very versatile one.
MAX3232CWE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
3.3/5V power supply
MAX3232CWE+T Applications
There are a lot of Maxim Integrated MAX3232CWE+T Drivers/Receivers/Transceivers applications.
- Routers
- Wireless multimedia center in smart home
- WDM transmission
- Televisions
- Home theater wiring-free
- Wireless communication
- Automation systems
- Shortwave receiver
- AV receiver
- Carrier phase observations
